Select Page

If you are a mechanic and are involved in some type of hydraulic system then chances are you already know how to do hydraulic repair. If not then it is time that you learn how to do hydraulic repair. If you do not have any hydraulic system then you need to learn how to do hydraulic repair. The reason for this is because if there is a problem with your hydraulic system and you do not repair it as soon as possible then you will find yourself struggling to get the problem fixed. This in turn will result in you having a service contract with the supplier that you work with and if you do not get the time table agreed with you then they are going to refer your case to a professional hydraulic repairman who will be able to get the job done at a very cost effective rate.

how to do hydraulic repair
Sauer Danfoss Hydraulic Repair

If you were to attempt how to do hydraulic repair on your own then chances are that you would make a number of mistakes which could cause more problems than it fixes. For example, if you attempt to repair a loose pipe on your own then you could end up causing even more damage because you might stick the pipe too far up or you might jam it all the way down resulting in it coming out the other end. This means that you will have to divert the flow away from whatever it is that you are trying to fix causing it to come back under pressure. If you were to stick the pipe too far up then you are also asking for failure as the hydraulic system will be unable to work correctly because the hydraulic fluid will be trapped between the pipe and the ceiling.

One of the main reasons that you will hear people telling you how to do hydraulic repair is because they will not attempt to fix a problem if they have seen it before. They might think that it is not worth the hassle of trying to correct a hydraulic system but they do not realise just how important this can be. One of the biggest reasons why your hydraulic system breaks down is because the hydraulic pump has not been working correctly or the seal has been compromised somehow. Both of these problems are relatively easy to fix. You just need to know how to do hydraulic repair yourself.

The first thing you will notice is that the hydraulic system will not be able to work as effectively as before. You will notice that there is a drop in the amount of hydraulic fluid being pumped into the pump. You should check the seals on both the hoses and the pump to ensure that they are not too worn. If they are then you may have to replace them as they are not holding the hydraulic fluid in.

Another sign that your hydraulic system is about to break down is if there is a noticeable decrease in the flow of hydraulic fluid. You will notice that the hydraulic fluid will be leaking out into the surroundings at an alarming rate. This may mean that the seal is becoming damaged but more likely it will mean that the fluid itself is leaking. It is always better to check all the seals on the hydraulic system before deciding that you cannot use them anymore. You do not want to have to use hydraulic fluid just because one of the seals has become damaged.

There are a number of ways on how to do hydraulic repair on a pump. You could try and force open the pump so that you can see the insides, which is often times the cause of the problem. This could be very difficult and dangerous, as there are a lot of moving parts. If this is not an option then you could opt to take it in to see a specialist to have it replaced.